top of page

2024

  • Golwala, K., Sarma, S., Garg Y, Agarwal A, 2024 "A polyester- stainless steel based smart wristband sensor for skin temperature monitoring”. The Journal of The Textile Institute, https://doi.org/10.1080/00405000.2024.2392905    IF=1.5

  • Sarma, S. Srivastava, R., 2024 "Strain cartography of bilayer graphene-PDMS nanocomposites using Raman spectroscopy”. Polymer Composites, 1-10; https://doi.org/10.1002/pc.28420 IF=5.2

2023

  • Yadav, Y.,Thapa, P., Sarma, S., 2023 "CNT/PVDF Strain Sensor Development through Integrated Experi- mental and Computational Analysis”. Instrumentation Science & Technology. https://doi.org/10.1080/10739149.2023.2278604

  • Sarma, S., Rao, V. R., 2023 ”Emerging Synthesis and Characterization Techniques for Hybrid Polymer Nanocomposites”. Accepted at Nanotechnology. https://doi.org/10.1088/1361-6528/acfef8   IF= 3.658

  • Phadkule, S. S., Sarma, S., (2023) ”Progress in Nanocomposite based Flexible Temperature Sensors: A Review” Measurement:Sensors, 27: 100692, https://doi.org/10.1016/j.measen.2023.100692

  • Verma, G., Sarmah, T. T., Sarma, S., Koch, E., Dietzel, A. (2023) Designing a Printed Strain Sensor Array with minimal Cross-Sensitivity and Orientation Independence. APSCON 2024, IEEE Applied Sensing Conference, Goa, India

2022

  • Phadkule, S. S., Sarma, S., (2022) High-performance flexible temperature sensor from hybrid nanocomposite for continuous human body temperature monitoring. Polymer Composites. https://doi.org/10.1002/pc.27178 IF= 3.2

  • Phadkule, S. S., Singh, S. V., Sarma, S. (2022) Influence of experimental conditions on conductivity of electrospun nanocomposite fibers. Materials Today: Proceedings.https://doi.org/10.1016/j.matpr.2022.11.244 IF=1.5

  • Singh, S. V., Sarma, S., (2022) Taylor cone height as a tool to understand properties of electrospun PVDF nanofiber. Journal of Electrostatics, 120:103770. https://doi.org/10.1016/j.elstat.2022.103770 IF=2

  • Sarma, S., Verma, A. K., et. al. (2022) Towards an Interpretable Machine Learning model for electrospun polyvinylidene fluoride (PVDF) fiber properties. Computational Materials Science, 213: 111661 https:// doi.org/10.1016/j.commatsci.2022.111661. IF=3.6

  • Singh S V, Sarma S (2022) Influence of experimental conditions on conductivity of electrospun nanocomposite fibers. International Conference on Nanotechnology for Sustainable Living and Environment (ICON-NSLE), BITS Pilani, India, 14-16th April.

  • Thapa P, Sarma S (2022) Analysis of Laser Ablation Synthesis in Solutions (LASiS) of silver nanoparticles (AgNPs) in DI Water and their dependence in laser repetition rate. Empowering ST with Women- A Step towards a New Era, IIT Jodhpur, India, 19th- 20th April.

2021

2020

  • Sarma S, Singh S, Garg A (2020) Laminated Ag and Ag/CNT nanocomposite films as sensing element for efficient thin film temperature sensors. Measurement. In press. https://doi.org/10.1016/j.measurement.2020.108876

  • Sarma S, Patsalas P (2020) Graphene nanostructures on electrodeposited Cu by chemical vapor deposition. International Conference on Recent Innovations in Engineering and Technology (ICRIET), Kuala Lumpur, Malaysia, 18th – 19th January.

2019

  • Sarma S, Fekas I, Filintoglou K,….Sahoo N, Patsalas P (2019)  Layer by layer deposition of alternate CNT and Ni films for efficient multilayer thin film temperature gauges. Journal of Physics D: Applied Physics 52, 095104. https://doi.org/10.1088/1361-6463/aaf692.

  • Sarma S, Gao L, Niu X, Garg A, Sandoval J (2018) Thermal performance of thin fim heat gauges of gold, silver and nanocomposite. Applied Thermal Engineering. 147: 545-550. doi: https://doi.org/10.1016/j.appliedthermaleng.2018.10.079.

  • Sarma S (2019) Dependence of resistivity on thickness of vacuum deposited copper thin films. 1st National Conference on Advances in Mechanical Engineering, NIT Delhi, India, 16th March.

  • Thakur S, Kumar H, Sarma S (2019) Flow simulation of atmospheric re-entry vehicle at varying mach number and angle of attack. International Conference on Emerging Trends in Electro-Mechanical Technologies and Management, New Delhi, India, 26th-27th July.

2018

  • Sarma S, Sahoo N, Unal A (2018) Prediction of experimental surface heat flux of thin film gauges using ANFIS. Journal of the Institution of Engineers: Series C. doi: https://doi.org/10.1007/s40032-018-0458-2

  • Sarma S, Lee JH (2018) Developing efficient thin film temperature sensors utilizing layered carbon nanotube films. Sensors 18(10), 3182; https://doi.org/10.3390/s18103182.

  • Ahadi A, Sarma S, Moon JS, Kang S, Lee JH (2018) A robust optimization for designing a charging station based on solar and wind energy for electric vehicles of a smart home in small villages, Energies 11(7), 1728; https://doi.org/10.3390/en11071728.

  • Sarma S, Lee JH (2018) The influence of new airfoil-shaped blades on a 5 mw wind turbine performance. Korea New & Renewable Energy Society 2018 Spring Conference, Seoul, South Korea, 19-20 April. 

2017

  • Sarma S, Lee JH (2017) Aerodynamic force analysis on novel airfoils shaped wind turbine blades under steady wind. KWEA: Korea Wind Energy Society 2017 Fall Conference, Jeju Island, South Korea, 30 October-1 November.

  • Sarma S, Lee JH (2017) Understanding dynamic torque behavior of novel airfoils designed for smaller wind turbine blades. The 6th Korea-Japan Joint Workshop on Fans and Compressors, Seongnam-si, Gyeonggi-do, South Korea, 6th November.

  • Sarma S, Lee JH (2017) Dynamic force analysis using bem theory on airfoils shaped wind turbine blades. The 7th Asia Pacific Forum on Renewable Energy AFORE, Busan, South Korea, 15 -18 November.

2016

  • Garg A, Sarma S, Panda BN, Zhang J, Gao L (2016) Study of effect of nanofluid concentration on response characteristics of machining process for cleaner production. Journal of Cleaner Production 135: 476-489. http://dx.doi.org/10.1016/j.jclepro.2016.06.122.

2015

  • Sarma S, Unal A, Sahoo N (2015) Thin film gauges using carbon nanotubes as composite layers. ASME Journal of Engineering Materials and Technology 138: 041014-1-8. doi: 10.1115/1.4033909.

  • Sarma S, Sahoo N, Unal A (2015) Calibration of a silver Thin Film Gauge for short duration convective step heat load. SADHANA (Indian Academy of Sciences Journal) 41 (7): 787-794. doi: 10.1007/s12046-016-0513-8.

2014

  • Sarma S, Sahoo N (2014) Computational study of a thin film heat transfer gauge for transient measurements. FMFP-5th International and 41st National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur-INDIA, 12-14 December

  • Sarma S, Agarwal S, Sahoo N (2014) Numerical and experimental study for measurement of exhaust gas temperature and heat flux using thermal sensors in an internal combustion engine. ICTACEM-6th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur-INDIA, 29-31 December.

2013

  • Gogoi TK, Sarma S, Borthakur S (2013) Simulation of a hybrid solid oxide fuel cell-gas turbine, International Journal of Emerging Technology and Advanced Engineering 3(3): 250-258. Special Issue. (My undergraduate work).

  • Sarma S, Sahoo N (2013) Thin film temperature sensors for transient measurement. Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur-INDIA, 28-31 December.

2010

  • Sarma S, Natarajan R, Kothari DP (2010) A critical analysis of Government of India policy towards wind power developments with reference to world scenario, Journal on Future Engineering and Technology 6(1): 1-5. (Undergraduate work)

Publications

bottom of page